Managed Layer 2+ Stackable Switches FSM7226RS and FSM7250RS Hardware Installation Guide
2-6
Hardware Installation
v1.0, October 2008
SFP Modules
The module bay accommodates a standard SFP module with an LC connector that is compatible
with the IEEE 802.3z 1000BASE-X standard. SFP modules are sold separately.
To install an SFP module insert the SFP module into the module bay. Press firmly to ensure that
the module seats into the connector.
Figure 2-2
Connecting a Redundant Power Supply
Each switch has a redundant power supply (RPS) connector at the rear of the switch next to the
power receptacle.
Power receptacle
Redundant
power supply
connector
Figure 2-3