NETGEAR FS608 Скачать руководство пользователя страница 2

Introduction

The NETGEAR® 8-Port Fast Ethernet Switch Model FS608 provides you with a low-cost,
reliable, high-performance switch to connect up to eight different Ethernet-enabled devices
(such as computers, file servers, print servers, printers, routers and hubs). 

You use the FS608 switch to build a small network that enables you to have 10 Mbps or 
100 Mbps access to other devices on the network. Also, with this switch, you can add extra
computers to your cable or DSL router. Unlike a hub that shares its connection with all
devices, the FS608 switch provides a full, dedicated 100 Mbps (or 10 Mbps) connection
between two devices. If a device has full-duplex capability, the FS608 switch provides a 
200 Mbps (or 20 Mbps) connection.

Ethernet cables come as either straight-through or crossover cables—depending on whether
you’re connecting to a device (computer, server, or printer) or networking equipment (hub,
switch, or router). With the Auto Uplink™ feature, you don’t have to worry about which one
you use. Each port on the FS608 switch automatically configures itself correctly when you plug
in a device’s cable.

If you have a problem with your switch, NETGEAR offers support 24 hours a day and 7 days
a week on the Web (www.NETGEAR.com), by e-mail ([email protected]) and by
phone (see the provided support information card for phone numbers).

Installation Overview

Estimated Time: 5–10 minutes

1.

Unpack the box and verify the contents.

2.

Prepare to install the switch.

3.

Install the switch and connect the other devices.

NETGEAR, INC.

4500 Great America Parkway
Santa Clara, CA 95054
USA

Support Information 

Phone: 1-888-NETGEAR
E-mail: [email protected]
www.NETGEAR.com

Technical Support 

YOU MUST REGISTER TO OBTAIN TECHNICAL SUPPORT. PLEASE RETAIN
PROOF OF PURCHASE and the warranty information. 

To register your product, get product support or obtain product information and product
documentation, go to http://www.NETGEAR.com/register.

You’ll find technical support information at: http://www.NETGEAR.com/ through the
customer service area. If you want to contact technical support by telephone, see the support
information card for the correct telephone number for your country. 

NETGEAR, Inc.

© 2002 by NETGEAR, Inc. All rights reserved.

NETGEAR and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. in the United States
and/or other countries.

Other brand and product names are trademarks or registered trademarks of their respective holders. 

Information is subject to change without notice. 

Fast Ethernet Switch FS608

Содержание FS608

Страница 1: ...pment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equip...

Страница 2: ...ers support 24 hours a day and 7 days a week on the Web www NETGEAR com by e mail support NETGEAR com and by phone see the provided support information card for phone numbers Installation Overview Estimated Time 5 10 minutes 1 Unpack the box and verify the contents 2 Prepare to install the switch 3 Install the switch and connect the other devices NETGEAR INC 4500 Great America Parkway Santa Clara ...

Страница 3: ...t Switch FS608 Stand 1 1 Prepare to Install the Switch Decide where you want to place the switch Find a flat horizontal surface such as a table desk or shelf The switch comes with wall mounting screws and a vertical stand You re welcome to use the screws if you want to hang the switch in an open space on a wall Use the vertical stand if you cannot provide adequate clear space on all sides with the...

Страница 4: ...not lit for a connected device or stays on continuously There s a hardware connection problem Make sure the cable connectors are securely plugged in at the switch and the device Make sure the connected device is turned on If the Ethernet cable is connected to a NIC or other Ethernet adapter make sure the card or adapter is installed correctly and is working Make sure the cable is less than 328 fee...

Отзывы: