Model FS2105/FS2108 Fast Ethernet Switch Installation Guide
Magnet Mounting the Switch
Inserting the Magnet
Removing the Magnet
To connect devices to the switch:
1.
Connect the devices to the 10/100 Mbps ports on the switch, using
category 5 UTP cable with an RJ-45 plug.
2.
Connect the switch for specific devices:
•
To connect to a PC or router, use port 5 Normal (or port 8 Normal). This
connection is considered “normal.”
•
To connect to a hub or another switch, use port 5 Uplink (or port 8
Uplink). This connection is considered “uplink.”
3.
Connect one end of the DC power adapter cable to the power outlet on
the rear panel of the switch and the other end of the power adapter
cable to the wall outlet. Verifying
Note:
Ethernet specifications limit the total cable length between
your PC and the switch to 328 feet (100 meters).
1
2
9640FA
1
2
9641FA
Connecting the Network
Содержание FS2105
Страница 1: ......
