NETGEAR FA310 - Adapter Card, Руководство по установке

Страница: 5 / 16

Model FA310TX Network Card Installation Guide
Using the appropriate UTP cable, connect any port on a network hub to the port
on the network card.
Note: One of the ports on NETGEAR hubs is switchable between
Normal (MDI-X) and Uplink (MDI) with a Normal/Uplink push
button. If you are using this switchable port on a NETGEAR hub to
connect to a PC or the network card, make sure the Normal/Uplink
push button is set to Normal.
Connect the Network Cables
7995FB
RJ-45
connector
RJ-45
connector
PC with network
card installed Power adapter
PC with network
card installed Printer
(optional)
*Use the cables provided or any Category 5 UTP cable.
Maximum length = 100 meters (300 feet)
Category 5 10/100 Mbps UTP cables*
Hub