6
Connect to an Existing WiFi Network
To extend the range of your WiFi network, you must connect the extender
to your existing WiFi network. You can do this in one of two ways:
•
Connect with WPS
. For more information, see
Connect with WPS
on
page 6.
•
Connect with web browser setup
. For more information, see
Connect with Web Browser Setup
on page 9
.
Connect with WPS
Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without
typing the network name and password.
Note:
WPS does not support WEP network security. If you are using WEP
security, follow the instructions in
Connect with Web Browser Setup
on
page 9
.
1. Press the
WPS
button on the extender.
The WPS LED
blinks.
2. Within two minutes, press the
WPS
button on your router or access
point.
The WPS LED on the extender lights solid green, the Router Link LED
lights, and the extender connects to your existing WiFi network.
