July 2009
This symbol was placed in accordance with the European Union Directive 2002/96 on the
Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the
European Union, this product should be treated and recycled in accordance with the laws of
your jurisdiction implementing the WEEE Directive.
© 2009 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered
trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product
names are trademarks or registered trademarks of their respective holders. Information is subject to
change without notice.
How to Use the
Remote Control
Power
Volume Up
Volume Down
Select/Play
Back
Home
Page Up/
Page Down/
Up
Left
Right
Down
Stop
Menu
Information
Mute
Search
Zoom Out
Zoom In
Frequently Asked Questions
1.
I can’t see the Digital Entertainer Live startup screen or menu?
Make sure that the TV input is set to the port where the Digital Entertainer Live cable
is connected and make sure that all cable connections are firmly secured.
Note:
If using an RCA cable, make sure you insert the plug all the way—you
should hear it “snap” into place.
2.
How do I get the best signal from my remote?
Aim the remote at the gray circle on the front of the Digital Entertainer Live.
3.
Can I reset the Digital Entertainer Live?
To power cycle the Digital Entertainer Live, press the Power button on the remote for
8 seconds while pointing directly at the unit. To restore factory defaults, go the
Settings menu and select Restore Factory Defaults.
4.
What network speeds do I need to use to connect the Digital Entertainer Live to
Internet content?
The recommended network speed is 1.5 Mbps. The minimum is 800 Kbps.
5.
What are the multifunction USB ports used for?
You can use these ports to connect a:
•
Digital Entertainer Live Wireless USB Adapter (EVAW111).
•
Flash drive, or a USB external drive (hard drive), or a larger personal USB drive
that is powered separately.
Note:
If you connect two USB drives, only the first device will function.
The file formats supported by the USB ports are FAT16, FAT32, and NTFS.
6.
My personal USB drive is not accessible?
Your USB drive might require external power. The Digital Entertainer Live USB ports
provide only 5 volts and 500 mA.
7.
Can I integrate my Digital Entertainer Live into my wireless network?
Yes, you can connect to your wireless router in a number of ways:
•
Connect wirelessly by installing the Digital Entertainer Live Wireless USB
Adapter (EVAW111), or
•
Connect to the router from a remote room by using your existing power outlets
with the NETGEAR Powerline Adapter kit (XAVB1001), or
•
You can also use the existing cable outlet, if available, and the NETGEAR
MoCA1001 MoCA Coax-Ethernet Adapter kit.
See the in-product Customer Support recommendations included with this
package on the CD.
Troubleshooting
•
The remote control does not respond.
Check to see if the battery is inserted correctly.
•
No audio/visual output.
Make sure that the A/V (RCA) cable is inserted fully. Remove the power cable
and insert again.
•
Using HDMI to DVI converter.
HDMI to DVI converters are not supported.
Technical Support
Thank you for selecting NETGEAR products. For more information and to access the
online
Digital Entertainer Live User Manual,
see the
Resource CD
that
came with your product.
After installing your device, locate the serial number on the label of your product
and use it to register your product at
http://www.NETGEAR.com/register
.
Registration
is required before you can use our telephone support service. Registration via our
website is strongly recommended.
Go to
http://kbserver.netgear.com
for product updates and Web support
.
For
Warranty and Regional Customer Support information, see the
Resource CD
.