Model DS309 Dual Speed Hub Installation Guide
Before you begin installing your Model DS309 hub, prepare the installation site. Make sure your
operating environment meets the operating environment requirements of the equipment.
To install your hub on a flat surface, you do not need any special tools. Be sure the hub is
positioned with at least 2 inches of space on all sides for ventilation.
To install the hub on a wall, measure the distance between the mounting holes on the back of the
hub and mark the wall to match the location of the mounting holes on the device. At the marked
location, screw into the wall the two screws that you received with the mounting kit included in
your package contents. Be sure to choose a location that is near the devices to be connected, is
close to an electrical outlet, and provides at least 2 inches of space all around the hub for
ventilation.
Before connecting the hub, be sure you review “Applications” for information about determining
the appropriate configuration for your networking needs.
To connect the hub:
1.
Connect the devices to the 10/100 Mbps ports on the hub, using Category 5 UTP cable
with an RJ-45 plug.
2.
Set the Normal/Uplink push button.
3.
Connect one end of the DC power adapter cable to the power outlet on the rear panel of
the hub and the other end of the power adapter cable to the wall outlet.
Characteristic
Requirement
Temperature
Ambient temperature between 0
q
and 40
q
C (32
q
and 104
q
F).
No nearby heat sources such as direct sunlight, warm air exhausts, or
heaters.
Operating humidity
Maximum relative humidity of 90%, noncondensing.
Ventilation
Minimum 2 inches (5.08 cm) on all sides for cooling.
Adequate airflow in room or wiring closet.
Operating conditions
At least 6 feet (1.83 m) to nearest source of electromagnetic noise (such
as photocopy machine or arc welder).
Power
Adequate power source within 6 feet (1.83 m).
Note: Ethernet specifications limit the cable length between your PC or server and
the hub to 328 feet (100 meters) in length.
Prepare the Site
Install the Hub
Connect Devices to the Hub
Содержание DS309
Страница 1: ......
