NETGEAR DM111P - ADSL2+ Ethernet Modem, Справочное руководство

Страница: 17 / 50

DM111P ADSL2+ Ethernet Modem Reference Manual
Introduction 1-5
v1.0, August 2006
The Modem’s Front Panel
The DM111P ADSL2+ Ethernet Modem front panel shown below contains status LEDs.
You can use the LEDs to verify various conditions. Table 1-1 lists and describes each LED on the
front panel of the modem. These LEDs are green when lit.
Figure 1-1
Table 1-1. LED Descriptions
Label Activity Description
1. Power
Solid On (Green)
Blinking (Green)
Solid On (Red)
Off Power is supplied and the modem in its normal operating mode.
Firmware update is in progress
Self test is in progress or self-test failed
Power is not supplied to the modem.
2. LAN
Solid On (Green)
Off A device is connected to the yellow Ethernet port.
No device is connected to the yellow Ethernet port.
3. ADSL
Solid On (Green)
Blinking (Green)
Off The modem is synchronized with your service provider’s DSLAM.
The modem is synchronizing with your service provider;s DSLAM.
No ADSL link detected.
4. Internet
Solid On (Green)
Off Internet connection is active.
Modem is powered off, or is in bridged mode, or there is no ADSL
connection.
1
2
3 4