NETGEAR genie BASIC Settings
28
D6300 WiFi DSL Modem Router
Internet Basic Settings
The Internet Basic Settings screen is where you view or change ISP information.
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Enter
http://www.routerlogin.net
.
A login window opens.
3.
Enter the modem router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
Internet
.
The Internet Setup page displays.
The fields that display in the Internet Basic Settings screen depend on whether your
Internet connection requires a login.
•
Yes
. Select the encapsulation method and enter the login name. If you want to
change the login time-out, enter a new value in minutes.
•
No
. Enter the account and domain names, only if needed.
5.
Enter the settings for the IP address and DNS server. The default settings usually work fine.
If you have problems with your connection, check the ISP settings.
6.
Click
Apply
to save your settings.
7.
Click
Test
to test your Internet connection. If the NETGEAR website does not display within
Internet Basic Settings Screen Fields
The following descriptions explain all of the possible fields in the Internet Basic Settings
screen. Which fields display in this screen depends on whether an ISP login is required.
Does Your ISP Require a Login?
Answer either yes or no.
These fields display when no login is required:
•
Account Name (If required)
. Enter the account name provided by your ISP. This name
might also be called the host name.
•
Domain Name (If required)
. Enter the domain name provided by your ISP.
These fields display when your ISP requires a login:
•
Internet Service Provider Encapsulation
. ISP types. The choices are PPPoE or
PPPoA.
•
Login
. The login name provided by your ISP. This name is often an email address.
•
Password
. The password that you use to log in to your ISP.
