NETGEAR D6220 Скачать руководство пользователя страница 213

Страница: 213 / 266

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Advanced Setup > Traffic Meter.

Select the Enable Traffic Meter check box.

By default, no traffic limit is specified and the traffic volume is not controlled.

In the Traffic Counter section, set the traffic counter to begin at a specific time and date.

To start the traffic counter immediately, click the Restart Counter Now button.

Click the Apply button.

Your settings are saved and the modem router restarts.

The Internet Traffic Statistics section helps you to monitor the data traffic. For more information, see

View the Internet Traffic Volume and Statistics

on page 213.

View the Internet Traffic Volume and Statistics

If you enabled the traffic meter (see

Start the Traffic Meter Without Traffic Volume Restrictions

on page 212),

you can view the Internet traffic volume and statistics.

To view the Internet traffic volume and statistics of the traffic meter:

Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.

Enter http://www.routerlogin.net.

A login window opens.

Enter the modem router user name and password.

Manage the Modem Router and Monitor the Traffic

213

AC1200 WiFi VDSL/ADSL Modem Router Model D6220

Содержание D6220











































































































































































































































































Результаты поиска

Содержание D6220

Отзывы:

NETGEAR D6220, Руководство пользователя, Страница: 213 / 266

Результаты поиска

Содержание D6220

Отзывы: