Quick Start
A
D
S
L
P
ho
ne
Line
N600 WiFi DSL Modem Router
Model D3600
AC750 WiFi DSL Modem Router
Model D6000
Package Content
You can connect the modem router either to an
ADSL service or to a cable or fiber modem. Choose
one connection method only. Do not use both.
Connect the Modem Router to an
ADSL Service
1. Contact your Internet service
provider (ISP).
Two types of DSL are available: ADSL and
VDSL. Contact your ISP to confirm that your
DSL service is ADSL. This product supports
only ADSL.
2. Connect the modem router to the
Internet.
Install an ADSL microfilter between the
phone line and the phone.
Use a phone cable to connect the microfilter
to the gray ADSL port on the modem router.
For additional information about connecting
to a DSL service, see the other side of this
installation guide.
3. Power on the modem router.
Connect the power adapter to the modem
router and plug it into an electrical outlet.
Wait for the startup procedure to complete
and the Power LED
to light solid green.
4. Connect a computer.
Use an Ethernet cable to connect your
computer to any yellow LAN Etherent port
on the modem router.
You can also use WiFi to connect. To connect
with WiFi, use the WiFi network name and
password on the product label.
5. Log in to the modem router.
Launch a web browser.
The NETGEAR genie Setup Wizard
displays.
If you do not see genie, in the
address field of the web browser,
enter
www.routerlogin.net
.
When prompted, enter
admin
for
the user name and
password
for
the password.
Wait for the startup procedure to complete
and the Power LED
to light solid green.
3. Connect a computer.
Use an Ethernet cable to connect your
computer to the yellow LAN1, LAN2, or
LAN3 Ethernet port on the modem router.
You can also use WiFi to connect. To connect
with WiFi, use the WiFi network name and
password on the product label.
4. Log in to the modem router.
Launch a web browser.
The NETGEAR genie Setup Wizard displays.
a. Select the
No
radio button to cancel the
Setup Wizard.
b. Click the
Next
button.
If you do not see genie, in the address field
of the web browser, enter
www.routerlogin.net
.
When prompted, enter
admin
for the user
name and
password
for the password.
5. In genie, change the default WAN
connection method.
a. Select
BASIC > xDSL
from the
NETGEAR genie menu.
b. From the
Physical WAN Type
menu,
select
Ethernet WAN
.
c. Click the
Apply
button.
6. In genie, start the Setup Wizard
manually.
a. Select
ADVANCED > Setup Wizard
from the NETGEAR genie menu.
b. Click the
Next
button.
Modem router
(Model D6000 shown)
Ethernet cable
Phone cable
Power adapter
(varies by region)
ADSL microfilter
(varies by region)
ADSL Internet
Modem router
Cable or fiber modem
Cable or fiber
Internet
Power adapter
ADSL
microfilter
Ethernet cable
to LAN4 WAN
port next to
ADSL port
Phone cable
to ADSL port
Connect the Modem Router
to a Cable or Fiber Modem
1. Connect the modem router to
the Internet.
Use an Ethernet cable to connect
the cable or fiber modem to the
yellow LAN4 WAN Ethernet port
next to the gray ADSL port on the
modem router. (Do not use another
LAN port for this connection.)
2. Power on the modem router.
Connect the power adapter to the
modem router and plug it into an
electrical outlet.
