NETGEAR CVG834G, Справочное руководство

Страница: 35 / 80

Wireless Cable Voice Gateway Model CVG834G Reference Manual
Wireless Configuration 2-13
v2.0, November 2007
Adding or Deleting a Wireless Card from the Access List
To add or delete a wireless card from the Setup Access List:
1. Click Setup Access List. The Wireless Card Access List screen displays.
The Access List displays a list of wireless clients that will have access to the wireless network
when the list is enabled.
2. You can add a device to the Access List using either of these methods:
• If the computer is in the Connected Wireless Devices table, click the radio button of that
computer to capture its MAC address.
• Specify the MAC address of the device to be added in the Add Access Filter fields. The
MAC address can usually be found on the bottom of the wireless device.
3. Click Add .
4. Repeat Steps 2 and 3 for each wireless PC that you are adding.
5. Click Apply to save these changes. Now, only devices on this list will be allowed to wirelessly
connect to the gateway.
To delete an entry from the Access List, select the corresponding radio button in the Access List
and then click
Delete .
Figure 2-8
Note: If no Device Name appears when you enter the MAC address, you can type a
descriptive name for the computer that you are adding.