Getting Started
7
CG3000DCR Advanced Cable Modem Gateway
Gateway Rear Panel
Power
Ethernet LAN ports
Coaxial
USB
adapter
input
cable
connector
port
Factory
Defaults
button
Figure 2. Gateway rear panel
The rear panel includes the following connections, viewed from left to right:
•
Four Ethernet LAN ports
. Use these ports to connect local computers.
•
USB port
. The USB port is a USB host and can be used for connecting a USB hard drive,
flash drive, or printer.
•
Factory Defaults button
. To return the gateway to its factory settings, press and hold
this button for over 7 seconds. See
Factory Default Settings
on page 40.
•
Coaxial cable connector
. Attach coaxial cable to the cable service provider’s connection.
•
Power
. Power adapter input.
Access the Gateway Menu
You can use your Internet browser to log in to the gateway to view or change its settings. To
log in to the gateway you must use a computer configured for DHCP (most computers are).
To log in to the gateway:
1.
On a computer that is connected to the gateway with an Ethernet cable, type
http://10.1.10.1
in the address field of your Internet browser.
A login window opens.
