May 2010
© 2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of
NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holders. Information is subject to change without notice.
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and
use it to register your product at
http://www.NETGEAR.com/register
. Registration is
required before you can use our telephone support service. Registration via our web
site is strongly recommended.
Go to
http://kbserver.netgear.com
for product updates and Web support
.
For Warranty
and Regional Customer Support information, see the Warranty Card that came with
your product.
Regulatory Compliance
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability,
NETGEAR reserves the right to change the product described in this document without
notice. NETGEAR does not assume any liability that may accrue due to the use or
application of the product(s) or circuit layout(s) described herein.
Certificate of Manufacture/Importer
It is hereby certified the NETGEAR model AXM763 has been suppressed in
accordance with the condition set out in MBPT-Amtsb|Vfg 243/1991 and vfg 46/
1992. The operation of some equipment (for example, test transmitters) in accordance
with regulation may, however, be subject to certain restrictions. Please refer to the note
in the operating instructions. Federal Office for Telecommunications Approvals has
been notified of the placing of this equipment on the market and has been granted the
right to test the series for compliance with regulation.
Note:
This device has been tested and found to comply with limits for a Class B digital
device, pursuant to part 15 of FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a commercial installation.
Laser Safety Warning
This is a Class 1 laser product.
Warning:
Because invisible laser radiation may be emitted from aperture of the port
when no fiber cable is connected, avoid exposure to laser radiation and do
not stare into the open aperture.
