15
Set Up Your System
Position Mode
Position mode is available only when the camera is not streaming, recording motion,
or in Motion Detection mode.
¾
To place your camera in Position mode:
1. Tap the
Arlo
icon
on your mobile device.
If you are using a computer, enter
arlo.netgear.com
in the address bar of a
browser.
If you are using a mobile device that supports Touch ID, you are prompted to
enable Touch ID or skip.
2. Tap or click
Settings
.
The Settings page displays.
3. Under
Camera Settings,
select the camera to position.
4. Tap or click
Position Mode
.
The camera starts streaming video.
Note:
In Position mode, the camera streams video as fast as possible, without buffering,
so that you can aim the camera while watching on a smartphone and make near real-time
adjustments to the camera position. This means that you might see lower-quality video
while the camera is in Position mode.
Recharge Your Arlo Pro Battery
The Arlo Pro battery is fully charged when it leaves the factory.
¾
To recharge the battery:
1. Place the camera indoors.
If you are using the camera outside, bring it inside while charging the battery.
2. Connect the power adapter cable to the camera power adapter.
Note: You must use an Arlo Pro power adapter to charge the battery.
