December 2005
©2005 by NETGEAR, Inc. All rights reserved.
NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries.
Other brand and product names are trademarks or registered trademarks of their respective holders. Information
is subject to change without notice.
Manually Set a Static IP Address for the Management CPU
1. Enter privilege mode by typing
enable
at the console prompt.
2. The system will ask for the password.
3. Press the
Enter
key without providing a password.
The system will display a modified prompt:
(GSM7224) #
4. Enter the following commands:
(GSM7324) #network protocol none
5. The system will respond like this:
Changing the protocol mode will reset the ip configuration.
Are you sure you want to continue? (y/n)
6. Enter
Y
.
7. After the system prompt returns, enter the following command:
(GSM7324) #network parms 192.168.1.100 255.255.255.0 192.168.1.1
The example above uses 192.168.1.100 for the IP address and 192.168.1.1 for the
gateway IP address. You should substitute your own IP addresses in the command
line above.
Log In to the Web Configuration Utility
1. Log in to the firewall by entering IP address the unit into a Web browser.
.
A login window like the one shown below opens:
2. Click the Login link.
A user name and password dialog box opens like this one.
3. Type the default user name of
admin
and default of no password, or whatever
password you have set up.
Once you have logged in, your Web browser should automatically find the switch and
display the home page. Use the home page to configure the switch. Consult the full
manual for your switch on the
Resource CD
for full configuration and command line
options.
Customer Support Information
Thank you for selecting NETGEAR products. Please register online and take advantage of
the technical support resources such as our online knowledge base. Point your browser to
http://www.NETGEAR.com/support/
and choose the product you are interested in to
browse for support information.
Register Your Product
To register, point your browser to this location:
http://www.NETGEAR.com/register