2
3
Then click the telephone extension you wish to configure. Linksys SPA 303 has up
to 3 lines.
Step 4
You must modify some parameters set by default.
Select YES to
“NAT mapping enable”
and
“NAT Keep Alive Enable”
Proxy:
sip.netelip.com
or
vpbx.netelip.com
(in case you are configuring an
extension of your vPBX)
User ID and Auth ID:
Enter your SIP user
Password:
Enter your SIP password (These data were sent to you by e-mail when
you first registered at www.netelip.com
Step 6
You can also name the extension to be showed in your telephone screen. Access
to “Phone” section and you will see next to each extension a short name to
define.
Check this example, where we name line 1 as Ext. 100 so that calls coming
from this line will be difference amongst calls coming from other lines on your
telephone.
Step 7
You can now start receiving and making telephone calls from Linksys SPA 303
with Netelip service using the best rates.
Enjoy the service.
To accept modifications clic on “Submit all changes” at the bottom of
configuration page.
Step 5
Should you need to configure line 2, click “Ext.2” and repeat the configuration
steps mentioned. Please be sure to increase the SIP port on one more, for
configuration of each line of your terminal. For example, Ext1 SIP port 5060, Ext2
SIP port 5061.
