Distribué par / Distributed by / Distribuito da NETELEC SRL FR - rue Philemon Laugier - 83400 Hyeres les Palmiers
2. INSTALLATION
NOTE: The fixture must be properly grounded to avoid accidental power leakage and electric shock
A qualified electrician must install the fixture. Before installing be sure to turn the power off
1
．
Take down the plastic shade;
2
．
Hold base against the wall and mark drill holes, paying attention to any existing
wiring in the wall;
3
．
Drill the holes, insert wall plugs;
4
．
Put the power wire and load wire through the base holes;
5
．
Screw the base into place. Make sure all the screws fasten when installation.
6
．
According to the input line of lamp’s terminal instruction
，
zero wire, live wire and
ground wire shall be corresponding connection with the reliability;
7
．
Connect N↑, ↑, L↑,with power supply
8
．
Fit plastic shade and test it for proper operation.
