NetCommWireless NTC-220 Series Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 28

NetCommWireless NTC-220 Series Скачать руководство пользователя страница 22

| Industrial

IoT

22

Regulatory compliance

FCC Statement

FCC compliance

Federal Communications Commission Notice (United States): Before a wireless device model is

available for sale to the public, it must be tested and certified to the FCC that it does not exceed

the limit established by the government-adopted requirement for safe exposure.

FCC regulations

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

•

Reorientate or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could

void the user‘s authority to operate the equipment.

MPRT-00004-000 Rev9_NTC-220_QSG.indd 22

13/11/2018 10:36:46 AM

«
...
20
21
22
23
24
...
»

Содержание NTC-220 Series





























Отзывы:

Нет отзывов