NP805N – Gigabit Wireless Router
24
NetComm NP805N - Gigabit Wireless Router
YMLO-805N
www.netcomm.com.au
L2TP
OPTION
DEFINITION
IP Mode
Select to use either a static or dynamically assigned IP address for your connection. When selecting to utilise a static IP
address, you will also need to enter the L2TP IP Address, L2TP Subnet Mask and L2TP Default gateway in use for the
connection
(Refer to your L2TP administrator for more information)
.
Server IP Address/Name
Enter the L2TP server name or IP Address.
L2TP Account
Enter the L2TP username supplied by your L2TP administrator.
L2TP Password
Enter the L2TP password supplied by your L2TP administrator.
Connection ID
Enter an Optional name to identify the L2TP connection.
Maximum Idle Time
The amount of inactivity on the internet connection before it is disconnected. Set it to zero or enable "Auto-reconnect" to
disable this feature.
Connection Control
There are 3 modes to select from:
Connect-on-demand: The NP805N will connect to the internet when a client sends outgoing packets.
Auto Reconnect (Always-on): The NP805N will automatically reconnect to the internet until the
connection is manually disconnected.
Manually: The NP805N will not connect to the internet until someone clicks the connect button in the
Status-page.
MTU
The default MTU value is 0 (auto). It is set automatically when you connect.
MPPE
Select to enable or disable the MPPE security extensions for the L2TP connection.
Multicast
Enable multicast support for this connection. Select the appropriate IGMP protocol version from the pull down menu.
IGMP Snooping
This option enables or disables "IGMP" for this connection type.
