manualshive.com logo in svg

NetComm V200, Руководство пользователя, Страница: 46 / 65

Поделиться
Скачать
NetComm V200 Скачать руководство пользователя страница 46

46

V200 VoIP Telephone Adaptor/Router 

YML795 Rev1

6.4  Remote Access

To manage the V200 via a web browser you do not have to login from a PC directly 

connected to the V200. With the Remote Access feature, you can login through the Internet 

from anywhere if you know the public WAN IP address of the V200. This feature is only 

available if you connect your V200 and configure your network in:

1)  Basic ADSL Router connection with the Router in Bridge mode or
2)  A Cable connection with no Router between the cable modem and the V200. 

Just type in the WAN public IP address in the address bar of your web browser and you can 

login into V200 remotely through the Internet.
Click the Remote Access menu item in the menu bar on the left to enable remote access to 

your V200.

Remote Access feature can put your V200 at risk because an intruder can access it in the 

same way. This menu gives you the option to Enable or Disable this feature. Simply make 

your selection then click the 

Apply

 button to submit the setting. The default is Disable.

Note: 

It is good practice to enable this feature only when necessary. 

Содержание V200


































































Отзывы:

Нет отзывов