16
1
：
The POE device must be placed far away from the heat source,
source of electromagnetic interference, corrosive gases and metal
dirt.
2
：
Do not block the cooling hole of the device.
3: Installation must be placed smoothly, without strenuous vibration.
4
：
make sure the AC input voltage range.
5
：
During the installation, it should prevent from Collision and
friction between the equipments, to avoid local damage of the
machine surface.
3.3 Start test
⑴
after loading, it is normal if displayed green light in the output port;
light flashes to indicate a short circuit and current limiting phenomena;
ALARM light is on, indicating that the device has malfunction.
⑵
After the AC power on, the front panel” POWER” light is on.
⑶
Total power, company information, the operating temperature and the
fan star and stop state etc. are displayed on LCD.
