NetComm NP3005 Скачать руководство пользователя страница 19

Rev.1 - YML671

www.netcomm.com.au

NP3005 - 5 Port Gigabit Switch

Page 19

Product Warranty

The warranty is granted on the following
conditions:

1.

This warranty extends to the original
purchaser (you) and is not transferable;

2.

This warranty shall not apply to software
programs, batteries, power supplies,
cables or other accessories supplied in or
with the product;

3.

The customer complies with all of the
terms of any relevant agreement with
NetComm and any other reasonable
requirements of NetComm including
producing such evidence of purchase as
NetComm may require;

4.

The cost of transporting product to and
from NetComm's nominated premises is
your responsibility; and,

5.

NetComm does not have any liability or
responsibility under this warranty where
any cost, loss, injury or damage of any
kind, whether direct, indirect,
consequential, incidental or otherwise
arises out of events beyond NetComm's
reasonable control. This includes but is
not limited to: acts of God, war, riot,
embargoes, acts of civil or military
authorities, fire, floods, electricity
outages, lightning, power surges, or
shortages of materials or labour.

6.

The customer is responsible for the
security of their computer and network at
all times. Security features may be
disabled within the factory default
settings. NetComm recommends that you
enable these features to enhance your
security.

The warranty is automatically voided if:

1.

You, or someone else, use the product, or
attempts to use it, other than as specified
by NetComm;

2.

The fault or defect in your product is the
result of a voltage surge subjected to the
product either by the way of power
supply or communication line, whether
caused by thunderstorm activity or any
other cause(s);

3.

The fault is the result of accidental
damage or damage in transit, including but
not limited to liquid spillage;

4.

Your product has been used for any
purposes other than that for which it is
sold, or in any way other than in strict
accordance with the user manual
supplied;

5.

Your product has been repaired or
modified or attempted to be repaired or
modified, other than by a qualified person
at a service centre authorised by
NetComm; and,

6.

The serial number has been defaced or
altered in any way or if the serial number
plate has been removed.

Limitations of Warranty

The Trade Practices Act 1974 and
corresponding State and Territory Fair Trading
Acts or legalisation of another Government
("the relevant acts") in certain circumstances
imply mandatory conditions and warranties
which cannot be excluded. This warranty is
in addition to and not in replacement for such
conditions and warranties.

To the extent permitted by the Relevant Acts,
in relation to your product and any other
materials provided with the product ("the
Goods") the liability of NetComm under the
Relevant Acts is limited at the option of
NetComm to:

Replacement of the Goods; or

Repair of the Goods; or

Payment of the cost of replacing the
Goods; or

Payment of the cost of having the Goods
repaired.

All NetComm ACN 002 490 486 products have
a standard 12 months warranty from date of
purchase. However some products have an
extended warranty option (refer to
packaging). To be eligible for the extended
warranty you must supply the requested
warranty information to NetComm within 30
days of the original purchase by registering
on-line via the NetComm web site at
www.netcomm.com.au.

NetComm reserves the right to request proof

of purchase upon any warranty claim.

Содержание NP3005





















Отзывы: