www.netcomm.com.au
35
NetComm NB304N – ADSL2+ Wireless N300 Modem
YML304X
Policy Routing
Policy Routing enables you to specify specific rules under which a route will be utilised.
To delete a route policy, click the Remove checkbox next to the selected policy and click Remove.
To add a new routing policy, click Add.
Enter the following parameters:
PARAMETER
DEFINITION
Policy Name
Enter a name to identify the routing policy
Physical LAN Port
Enter the physical port to apply the routing policy to
Source IP
Enter the source address of traffic to apply the routing policy to
Use Interface
Enter the interface to apply the routing policy to
Default Gateway
Enter the default gateway to use with the routing policy.
Click Save/Apply to save the new routing policy entry.
RIP
The Routing Information Protocol (RIP) is a distance based routing protocol and uses hop counts as a routing metric. RIP can only
be used on WAN connections which do not utilise NAT.
Select the RIP version and Operation mode to use with the specified WAN service interface.
Click Apply/Save to save the new RIP configuration settings.
