NetComm MyWay YMLO-3G8WV, Руководство пользователя

Страница: 24 / 46

NetComm MyWay – 3G WiFi Router with Voice User Guide YMLO-3G8WV
24 www.netcomm.com.au
5.2.3.3 PPPoE (ADSL)
Most ADSL/ADSL2+ services use the PPP over Ethernet protocol. Use this if you connect your MyWay to a bridged ADSL modem.
Name Description
Username/Password Type in your PPPoE account username and password.
Operation Mode; There are 3 options:
‘Keep Alive’ Keeps the Internet connection alive, does not disconnect.
‘On Demand’ Only connects to the Internet when there’s a connect attempt
‘Manual’ Only connects to the Internet when the ‘Connect’ button on this page is pressed, and disconnects
when the ‘Disconnect’ button is pressed.
MAC Clone Please input the MAC address of your computer here if your service provider only permits computers
with a certain MAC address to access the Internet. If you are using the computer which used to
connect to the Internet via cable modem, you can simply press the ‘Default’ button to fill the MAC
address field with the MAC address of your computer.
Click ‘Apply’ to save the settings.
5.2.3.4 PPTP
Name Description
Server IP
Type in the server IP address assigned by your Internet Service Provider.
User Name/Password Type in the username and password assigned by your provider.
Address Mode Select Dynamic if your service uses a DHCP server, or select Static and type in the IP address, Subnet Mask and Default
Gateway assigned by your Internet Service Provider.
Operation Mode
‘Keep Alive’ Keeps the Internet connection alive, does not disconnect.
‘On Demand’ Only connects to Internet when there’s a connection attempt
‘Manual’
Only connects to the Internet when the ‘Connect’ button on this page is pressed, and disconnects when the ‘Disconnect’
button is pressed.
Mac Clone Please input the MAC address of your computer here if your service provider only permits computers with a certain MAC
address to access the Internet. If you are using a computer which used to connect to the Internet via a cable modem, you can
simply press the ‘Default’ button to fill the MAC address field with the MAC address of your computer.
Click ‘Apply’ to save the settings.