NetComm Freshtel NB9W, Быстрый старт

Страница: 11 / 32

NB9/NB9W ADSL2+ VoIP Router 11
YML789 Rev1
Restore Factory Default Setting
Restore Factory Defaults will reset the NB9/NB9W to its factory default configuration. Occasions
may present themselves where you need to restore the factory defaults on your NB9/NB9W such as:
• You have lost your username and password and are unable to login to your NB9/
NB9W’s web configuration page;
• You have purchased your NB9/NB9W from someone else and need to reconfigure the
device to work with your ISP;
• You are asked to perform a factory reset by NetComm Support staff
In order to restore your NB9/NB9W to its factory default settings, please follow these steps:
• Ensure that your NB9/NB9W is powered on (for at least 10 seconds);
• Use a paper clip or a pencil tip to depress the reset button for ten seconds and release. At
this point, the reset is in progress. Do not power off the unit at this point;
• When indicator lights return to steady green, reset is complete. The default settings are
now restored. The entire process takes about 45 seconds to complete;
• Once you have reset your NB9/NB9W to its default settings you will be able to access
the device’s configuration web interface using http://192.168.1.1 with username ‘admin’
and password ‘admin’;