ADSL COMPLIANCE
ADSL
•
ANSI T1.413 Issue 2
•
ITU G.992.1 Annex A (G.dmt)
•
ITU G.992.2 Annex A (G.lite)
•
ITU G.994.1 (G.hs)
•
Maximum Rate: 8 Mbps downstream and 1 Mbps
upstream
ADSL2
•
ITU G.992.3
•
ITU G.992.4
•
Maximum Rate: 12 Mbps downstream and 1 Mbps
upstream
ADSL2+
•
ITU G.992.5
•
ITU G.992.5 Annex M
•
Maximum Rate: 24 Mbps downstream and 1.2 Mbps
upstream
ATM
•
PPPoA (RFC 2364) and PPPoA Bridged mode
•
PPPoE (RFC 2516) and PPPoE Bridged mode
•
IPoA (RFC 2225)
•
Bridged mode over AAL5 (RFC2684/1483)
•
ATM Forum UNI 3.1 / 4.0 compliant PVCs
•
UBR and CBR with traffic shaping
•
OAM F4/F5 loopback cells
BRIDGING
•
IEEE 802.1d self-learning bridge
•
Learning up to 4096 MAC addresses
•
Transparent Bridging between 10/100 Ethernet and USB
ROUTING
•
NAT / PAT allows multiple users to share Internet access
•
UPnP IGD with NAT traversal capability
•
Port Forwarding: users can setup multiple virtual servers
(e.g., Web, FTP, Mail servers) on the local network.
•
Static routing & dynamic routing RIPv1/v2
•
DNS Relay, Dynamic DNS
•
DHCP Client/Relay/Server
•
IGMP Proxy
•
Support IP/Bridge QoS for different traffic classes
•
Support reservation of bandwidth to guarantee voice
quality of VoIP applications.
SUPPORTED APPLICATIONS
•
Application Level Gateways preset for Auth/Ident, DNS,
FTP, PPTP, IPSEC, POP3, SMTP, SSH, TELNET, TFTP &
WEB servers. Multiple Virtual Servers can be setup in local
network.
•
VPN passthrough: PPTP & IPSEC.
•
NetMeeting, MSN Messenger, FTP, Quick Time, mIRC,
Real Player, CuSeeMe, online gaming.
SECURITY
•
PAP, CHAP, and MS-CHAP for PPP authentication
•
Firewall based on incoming & outgoing filtering of IP
address/Port number/Protocol type.
•
Ping blocking from WAN.
•
DMZ hosting.
CONFIGURATION AND MANAGEMENT
•
Embedded web configuration interface with password
protection
•
Remote management control
•
Telnet session for local or remote management
•
System events logging
•
DSL connection diagnostics
•
Firmware upgrade via web browser
•
User setting backup & restore
HARDWARE INTERFACE
•
One RJ-11 port for ADSL connection
•
One Ethernet port for IEEE 802.3/802.3u 10/100 Base-T
auto-sensing, auto cross-over.
•
One hidden reset button for restoring factory default
settings
CHIPSET
•
Broadcom BCM6332 single-chip ADSL2+.
•
4MB Flash/16MB SDRAM
REGULATORY APPROVAL AND COMPLIANCE
•
ACA, Telepermit
POWER REQUIREMENT AND OPERATION
ENVIRONMENT REQUIREMENT
•
Power Adaptor: Output 12 VDC, 0.5A
•
Power Consumption: less than 5 W
•
Ambient Temperature: 0 to 40°C
•
Relative Humidity: 20% to 90% (non-condensing)
PHYSICAL
•
Front Panel: 4 LED Indicators - Power, ADSL, PPP,
Ethernet
•
Dimensions: 88mm(L) x 105mm(W) x 20mm(H)
•
Weight: 58g
TECHNICAL SPECIFICATIONS
NETCOMM DYNALINK™ SERIES
ADSL2+ Modem Router
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product.
The
Dynalink RTA1320V6 ADSL2+ Modem Router
is capable of delivering high-speed internet
access. With speeds of up to 24Mbps* watching movies, downloading music and online gaming
becomes second nature with this powerful but compact device.
With all the features you expect from a quality modem/router the
ADSL2+ Modem Router
comes
with a NAT firewall and QoS making it suitable for any use that requires prioritisation such as online
gaming or VoIP.
The
ADSL2+ Modem Router
comes with a single Ethernet port for connecting to existing networks.
The
ADSL2+ Modem Router
is also Windows 7 compatible, making it the perfect choice if you’re
looking for a modem that will work with the new OS.
The RTA1320V6 ADSL2+ Modem Router is IPv6 ready. Future proof yourself by making sure your
device will support the new protocol when the Internet switches to IPv6 addresses.
* Please note that actual speeds may differ and are dependent on your ISP
Telephone
Wall Socket
Power
Point
Power
Adapter
Computer
DYNALINK
Head Office – 12c Te Kea Place, Albany Auckland, New Zealand
P:
+64 9 448 5548
F:
+64 9 448 5549
E:
W:
www.dynalink.co.nz
NETCOMM LIMITED
PO Box 1200, Lane Cove NSW 2066 Australia
P:
02 9424 2070
F:
02 9424 2010
E:
W:
www.netcomm.com.au
ABN 85 002 490 486
