HS960 Wireless Gateway
User Guide
YML857 Rev1
1
www.netcomm.com.au
2. INSTALLATIoN
2-1 Wall-Mounting
The HS960 can be wall-mounted by applying the two mounting brackets supplied.
Figure -1 Wall-Mounting Bracket - Bottom of HS960
1.
Install two screws on a wall according to the relative positions shown below.
Figure -
2.
Hang HS960 on the wall by sliding the two screws in the mounting brackets.
Note: If the screws are not properly anchored, the strain of the cables connected to the HS960 rear panel connectors could pull out the
HS960 from the wall.