NetComm Wireless NWL-12 Series, Руководство пользователя

Страница: 66 / 126

66
NetComm Wireless 3G Light Industrial M2M Router www.netcommwireless.com
Network time (NTP)
The NTP (Network Time Protocol) settings page allows you to configure the 3G Light Industrial M2M router to synchronize its internal clock with a global Internet Time server and specify the time
zone for the location of the router. This provides an accurate timekeeping function for features such as System Log entries and Firewall settings where the current system time is displayed and
recorded.
Any NTP server available publicly on the internet may be used. The default NTP server is 0.netcomm.pool.ntp.org.
Figure 71 - NTP settings
Configuring Timezone settings
To configure time zone settings:
1. The
Current time
field shows the time and date configured on the router. If this is not accurate, use the
Time zone
drop down list to select the correct time zone for the router. If the
selected zone observes daylight savings time, a
Daylight savings time schedule
link appears below the drop down list. Click the link to see the start and end times for daylight
savings.
2. When you have selected the correct time zone, click the
Save
button to save the settings.
Configuring NTP settings
To configure NTP settings:
1. Click the
Network time (NTP)
toggle key to switch it to the
ON
position.
2. In the
NTP service
field, enter the address of the NTP server you wish to use.
3. The
Synchronization on WWAN connection
toggle key enables or disables the router from performing a synchronization of the time each time a mobile broadband connection is
established.
4. The
Daily synchronisation
toggle key enables or disables the router from performing a synchronization of the time each day.
5. When you have finished configuring NTP settings, click the
Save
button to save the settings.