CS
TECHNOLOGIES
Defining the future of
Access Control
Head Quarters - Sydney NSW Australia
Sales: [email protected], Support: [email protected]
Tel. +61 2 9809 5176, Fax. +61 2 8878 0222
Sales: [email protected], Support: [email protected]
ABN: 13 108 508 676
Enable PING and HTTP service
A handy feature (to help with debugging) is to enable PING and HTTP on the NetComm router.
Go to ‘
System / Administrator
’
Enable all 3 options shown below
Once this enable you then can
remotely
test if you can ping the device. As well as remotely open
the configuration page in a web browser (http://123.209.21.28:8080 in this example)