26 (36)
7
Configuring the Netbiter
Netbiter EasyConnect gateways are normally configured using device-specific
configuration sets called
device profiles
.
In the following chapter you will add a device profile in Netbiter Argos and
then upload it to the gateway. The procedure is slightly different depending
on whether you are using a temperature sensor or a tank sensor.
7.1
Temperature Sensor
1.
On the
Management
page, select
Configuration
and click on
Add device
.
2.
Select
Use configuration from a profile
, and in the
Device type
drop-
down menu, select
Virtual ECxxx series
. This will load the associated
pre-configured device profile.
Netbiter
®
EasyConnect Starter Kit User Manual
Doc ID: SP1706
Version: 3.00
