NetApp SteelStore 30 Series, Руководство пользователя

Страница: 18 / 71

Overview
13
2.2 The Core Product
The SteelStore xx30 Series appliance is an enclosure subsystem together with a set of plug-in modules
and comprises:
• An enclosure chassis comprising:
– A backplane PCB.
– An Enclosure Management Card (EM Card).
– An integral Operator’s (Ops) Panel.
– An integral rear panel, incorporating an Appliance ID LED (see Figure 2–10 ).
– A power supply mounting cage containing two 850W, 100-240V AC auto-ranging, plug-in
Power Supply Units (see
Figure 2–8 ).
• An ATX server subsystem. Refer to section 2.4 on page 14 for details.
• A cooling cage, containing 10 high speed single rotor axial fans which are individually pluggable.
• Up to 12 drive carrier modules with 3.5-inch drives installed (see Figure 2–10 ). Dummy drive
carrier modules must be fitted in all unused drive bays.
• A rack mounting rail kit for mounting the appliance in a 19-inch rack.
The high speed serial architecture of the SteelStore storage system provides three 4-lane connections
from the EM Card to the HBA.
Module and major component locations are shown in Figure 2–3 .
Figure 2–3 Module Locations