MAINT=number_of_hours_downh
The following AutoSupport message suppresses automatic case creation for two hours:
cluster1:*>
system node autosupport invoke -node * -type all -message MAINT=2h
3. Check the version of ONTAP the system is running on the impaired node if up, or on the partner node if the
impaired node is down, using the
version -v
command:
◦
If <lno-DARE> is displayed in the command output, the system does not support NVE, proceed to shut
down the controller.
◦
If <lno-DARE> is not displayed in the command output, and the system is running ONTAP 9.6 or later,
go to the next section.
4. If the impaired node is part of an HA configuration, disable automatic giveback from the healthy node:
storage failover modify -node local -auto-giveback false
or
storage failover
modify -node local -auto-giveback-after-panic false
Check NVE or NSE on systems running ONTAP 9.6 and later
Before shutting down the impaired node, you need to verify whether the system has
either NetApp Volume Encryption (NVE) or NetApp Storage Encryption (NSE) enabled. If
so, you need to verify the configuration.
1. Verify whether NVE is configured for any volumes in the cluster:
volume show -is-encrypted true
If any volumes are listed in the output, NVE is configured and you need to verify the NVE configuration. If
no volumes are listed, check whether NSE is configured.
2. Verify whether NSE is configured:
storage encryption disk show
◦
If the command output list the drive details with Mode & Key ID information, NSE is configured and you
need to verify the NSE configuration.
◦
If no disks are shown, NSE is not configured.
◦
If NVE and NSE are not configured, it’s safe to shut down the impaired node.
Verify NVE configuration
1. Display the key IDs of the authentication keys that are stored on the key management servers:
security
key-manager query
◦
If the
Key Manager
type displays
external
and the
Restored
column displays
yes
, it’s safe to shut
down the impaired node.
◦
If the
Key Manager
type displays
onboard
and the
Restored
column displays
yes
, you need to
complete some additional steps.
◦
If the
Key Manager
type displays
external
and the
Restored
column displays anything other than
yes
, you need to complete some additional steps.
◦
If the
Key Manager
type displays
onboard
and the
Restored
column displays anything other than
yes
, you need to complete some additional steps.
2. If the
Key Manager
type displays
onboard
and the
Restored
column displays
yes
, manually backup
the OKM information:
a. Go to advanced privilege mode and enter
y
when prompted to continue:
set -priv advanced
14
