Using the NetMeter
To lock measurements for offline viewing move the lock
switch to the
position. To erase
Stored values are retained indefinitely, providing the lock
switch is left in the
position, and the
- even if the meter is turned off.
batteries are
good
stored values and
restart bus analysis move the lock switch to “Run”.
The NetMeter is reset (Min/Max and other stored
measurements cleared) when the Lock switch is moved
to the "Run" position, and when the power switch is
turned On while the Lock switch is in the "Run" position.
You may reset stored measurements by either turning
the meter off and on again, or by moving the Lock switch
to
and back to “Run”.
Each selector switch position accesses a different bus
measurement, and each supports several different
measurement types.
Pressing
cycles the display through the different
measurements available at each switch position.
Some measurements allow a detailed view for each
MAC ID. Press
OR
to cycle through the active
MAC IDs. Press
AND
together to return to the
overall network view
Display Lock
Resetting Min/Max Measurements
Viewing Measurements
LCD Display
Pushbuttons
Selector switch
Next measurement
Next MACID
Previous MACID
Return to Network
View (push at the
same time)
4
