NET Corsight CO1041C2 Скачать руководство пользователя страница 26

Страница: 26 / 50

26/50

tio

t t

iss

ith

t n

tio

l M

l -

connectors carrying the signals is documented in Section “

Dimensions

” and Section “

Connector and

cable description

”

DC power input

CORSIGHT cameras are designed for power supply input range of 24 V ±10%. The power consumption

strongly depends on the connected peripherals — devices being powered by CORSIGHT through the

USB or other interfaces. The power consumption of the CORSIGHT itself is typically 15 W, while the total

power consumption, including the connected peripherals, should not exceed 25 W. A suitable power

supply for CORSIGHT is available from NET.

The customers designing an own power supply will find the information about the power input

connector in Section “

I/O connector

”.

Power over Ethernet (PoE+)

The CORSIGHT cameras can be also powered using the Power over Ethernet option. The cameras are

compatible with the Power over Ethernet standard, versions IEEE 802.3af and 802.3at. They should be

used with PoE switches (“endspans”) or power injectors (“midspans”) complying with the IEEE

802.3af/IEEE 802.3at specifications.

Both PoE modes (A and B) are supported by the camera. Beware of using the PoE cameras with 100Mbit

Ethernet only cables, where the “spare” wire pairs might be omitted. With such cable, the power

wouldn't be delivered when using Mode B compatible power sourcing equipment.

The CORSIGHT camera models are classified in the power level class 4. The power consumption with PoE

is slightly higher than consumption with “regular” power supply. When connecting multiple CORSIGHT

cameras to a single PoE switch, verify, how much total power the switch can provide and how it handles

cases when the limit is exceeded.

PC interfaces

For completeness, the PC interfaces of the CORSIGHT camera are again listed below. The components

driving individual principal interfaces are described in Section “

System architecture

”.

Ethernet

CORSIGHT provides a Gigabit Ethernet connectivity (compatible also with 10Mb/100Mb/1GB networks).

Display

CORSIGHT connects with Displayport compatible displays. The DP interface is available through a custom

connector (Section “

PC system connector

” ),

adapter cable with standard DP++ connector is available.

USB

A USB port is available through a custom connector (Section “

PC system connector

” ).

Standard Type A

connector is available over an adapter cable.

Содержание Corsight CO1041C2



















































Результаты поиска

Содержание Corsight CO1041C2

Отзывы:

Бренды по названию

Популярные бренды

NET Corsight CO1041C2, Руководство по эксплуатации

Результаты поиска

Содержание Corsight CO1041C2

Отзывы:

Бренды по названию

Популярные бренды