STEP 1. Fit wheels
Slide one castor into each of the uprights on the back and front (parts C and D).
Align the holes in the castor with the pre-drilled holes in the tubes,
once this is done slide a bolt through each of the holes and secure in place with
the nuts provided.
STEP 2. Fit basket and Bottom tray.
Lay the front end on the floor being careful not to scratch the paint.
Unfold the basket and locate the threaded ends of the basket into the
pre-drilled holes in the frame. Once complete locate the threaded ends of the
tray into pre-drilled holes nearest the wheels.
Threaded ends
Threaded ends
