ASSEMBLY INSTRUCTIONS
Feed uprights through brush holder ensuring fixing holes align, loosely secure in
place using nuts and bolts provided.
STEP 1:
STEP 2:
Attach large brush to brush holder using nuts and bolts provided.
STEP 3:
Attach small brushes to Uprights using fixing plate between the brush and upright,
secure using nuts and bolts provided.
STEP 4:
If you wish to fix the boot wiper to a wall you should slide one wall fixing over each
of the uprights at this point.
STEP 5:
Attach handle bar to uprights using 2 bolts on each side. Once the frame is assembled
tighten all nuts and bolts.
Do not climb or swing on the boot wiper.
The boot wiper should be fitted to the ground by a
competent person using due diligence and risk assessment.
Net World Sports will not be responsible for injury or damage
caused by a poorly fitted boot wiper.
The boot wiper should be checked periodically for damage,
wear and tear.
Please report any missing or damaged parts immediately.
Net World Sports USA
www.networldsports.com
[email protected]
1-866-861-9095
Net World Sports UK
www.networldsports.co.uk
[email protected]
+44 (0) 1691 683 807
