5.
Step 6 - Assemble backboard
lay out the backboard sections (39188) and backboard inner brace (39192)
Slide the inner braces into the backboard sections ensuring the pre-drilled holes are aligned.
see fig 6.
Fig 6.
Slide M8 washer over M8x65 bolt (39208)
and inner braces. repeat this for the top 3 rows (x12)
See fig 6a.
fig 6a.
Locate through backboard braces (39194), Backboard
secure using M8 washer (38094) and M8 lock nut (38082)
39208
39194
38094
38082
Step 7 - Fitting back tube
Lay out back tubes (39199)
Slide 2x M10x70 bolts (39211) into each end of the back tubes
locate the pre-positioned bolts in the back tube through the pre-drilled holes in backboard,
secure in place with M10 wahsers and M10 lock nut
PLEASE NOTE
If you have bought weights for this product
they should be fitted into back tube at this point
see fig 7. and 7a.
39211
39211
Fig7.
Fig7a.
