3.
STEP 1 - Crossbar (Fig. 1)
Fig.1
Lay out the Crossbar (38237) and Connector (38260).
Slide 2x M10x20 Bolts (38049) into each Crossbar section
ensuring they are between the holes as per the diagram.
Slot the Connector (38260) into the Crossbar ensuring
that the holes align.
38237
38260
STEP 2 - Crossbar (Fig. 2)
Screw 4x M8 Hex Bolts (38071) into Connector (38260) ensuring
the 4x M8 Spring Washers (38099) are in place as per diagram.
Slide the Straight Bracket (38027) onto the M10 Bolts (38049).
Place M10 Washers (38088) over pre-inserted bolts and secure
in place with M10 Nuts (38077).
STEP 3 - Attach Crossbar to Uprights (Fig. 3)
Slide 6x M10x20 Bolts (38049) into both Corner Joints (38444).
Attach the Corner Joints to the Crossbar and Uprights (38242).
Fig.2
Fig.3
38027
38099
38071
38088
38077
38444
38049
38049
38237
38237
38237
38444
38237
38242
