Net Optics BPO-LX, Руководство по установке

Страница: 12 / 16

8
Optical Bypass Switch
Connecting to the In-line Security Device
1 . Connect Monitoring Port A to the in-line appliance Port A using a duplex
SC fiber cable.
2 . Connect Monitoring Port B to the in-line appliance Port B using a duplex
SC fiber cable.
3 . Verify that the Switch Monitoring Ports are cabled in-line between two
devices .
4 . Connect the control cable or power supply to the switch . If you are
installing the models BPO-SX and BPO-LX, make sure you connect the
switches' power supply to the same power sources that in-line appliance
is using .
Figure 6. Connecting to the Monitoring Device
To In-Line Security Device
B
OUT IN OUT IN
®
Optical Bypass Switch
Monitor
OUT IN
IN OUT
A A B
Network
B A
B A
A A