iTap GigaBit Copper Port Aggregator
25
Con
fi
guring the iTap
Web Manager has both read-only and read/write
fi
elds. Use the read/write
fi
elds
in the
iTap Con
fi
guration
section of the Web Manager page to set con
fi
guration
parameters (see Figure 18).
Figure 18:
iTap Con
fi
guration
The following table explains each available option. To make your changes take
effect, click
Submit Changes
at the bottom of the page.
Field Name
Function/Value
Description
IP Address
0.0.0.0
IP address of the iTap. The default
IP address is 10.60.0.123. You can
change the IP address by typing a
new IP address in the text box.
Net Mask
0.0.0.0
Displays current Net Mask of the
iTap. The default Net Mask is
255.255.0.0. You can change the IP
address by typing a new Net Mask in
the text box.
Manager IP
Address
0.0.0.0
IP Address of the computer running
Net Optics System Manager over a
WAN. You can change the IP address
by typing a new IP address in the
text box.
Gateway IP
Address
0.0.0.0
Displays current IP Address of the
current WAN Gateway. You can
change the Gateway by typing a new
IP address in the text box.