NESTOR MARTIN TQ33, Инструкция по эксплуатации

Страница: 103 / 120

103
USING WOOD> LIGHTING MANUALY
•
Set the UPPER AIR SUPPLY to maximum
•
Set the LOWER AIR SUPPLY to maximum
Tip: leave the door slightly open to stoke the fi re.
It will increase the draw and allow an ember bed to be achieved.
•
On the grate, place some paper or shavings, kindling and some small logs.
•
Light the paper
•
When the fi re has started, close off the lower air supply. Normally, it must
remain in the closed position when burning wood.
Important: in the event of a weak draw and/or an insuffi cient ember bed, it
is advised to leave the lower air supply open slightly in order to allow your
appliance to reach its normal performance (sometimes this can take more
than an hour).
•
Then, adjust the fl ow to the desired intensity with the upper air control. With
practice, you will quickly be able to fi nd the position that suits you best.
USING WOOD>LIGHTING WITH THE REMOTE CONTROL
•
Set the UPPER AIR SUPPLY to maximum by pressing the + button on the
remote control.
•
Set the LOWER AIR SUPPLY to maximum
. Tip: leave the door slightly open to stoke the fi re.
It will increase the draw and allow an ember bed to be achieved.
•
On the grate, place some paper or shavings, kindling and some small logs.
•
Light the paper..
•
When the fi re has started, close off the lower air supply. Normally, it must
remain in the closed position when burning wood.
Important: in the event of a weak draw and/or an insuffi cient ember bed, it
is advised to leave the lower air supply open slightly in order to allow your
appliance to reach its normal performance (sometimes this can take more
than an hour).
•
Then, adjust the fl ow to the desired intensity with the upper air control. With
practice, you will quickly be able to fi nd the position that suits you best.
?
?