Page 6
Fit one end of the Receiver Video/Audio Lead to the Receiver, connecting
yellow to “VIDEO OUT” and white or red to “AUDIO OUT”.
Fit the other end of the Receiver Video/Audio Lead to the direct input video/
audio of your TV. Connect yellow to video in, and white or red to an audio in
socket.
As an alternative, you may prefer to fit this in to the Video/Audio connectors
on a video recorder or VCR.
If you only have a SCART input socket for your TV, you can fit the cable
through an appropriate adaptor (not supplied).
The cable (and the signal it carries) is not suitable for direct connection to
your TV aerial or antenna socket.
Turn the TV on, and switch it to the direct video/audio input.
Set the Channel Switch on the Receiver to the channel number indicated by
the label on the camera. You should see a picture from the camera on your
TV screen, and hear through the TV if you tap the camera gently.
The picture can also be viewed on a PC equipped for video input.
4.4
Wired Connection to the TV
Connect the two Phono connectors at one end of the video/audio cable to the
connectors at the end of the camera lead. Connect (video) yellow to yellow,
and (depending on which cable has been supplied) (audio) red or white to red
or white.
Plug the video (yellow) and audio (red or white) connectors at the other end
of the video/audio cable into the video and audio input sockets of your TV.
Page 4
