Page 6
Fit the cables entering the Battery Box through the cable slot in the base of the
Battery Box, and carefully secure the front using the 4 plastic pegs (which
should be inserted fully, and then turned 90
⁰
with a screwdriver to lock).
4.3
Set up the Receiver and Connect to TV
Screw the Antenna onto one end of the Re-
ceiver. Adjust the angle of the Antenna so
that it is approximately vertical. The receiver
can be mounted vertically using the screw
holes provided, or rested in a horizontal posi-
tion.
Fit the 9/12V Mains Power Supply (it
has a cylindrical plug) to the Receiver
(DC 9-12V) and plug it into the Mains.
Switch the power on. The red indicator
light will show it is on.
Fit one end of the Receiver Video/
Audio Lead to the Receiver, connecting
yellow to “VIDEO OUT” and white or
red to “AUDIO OUT”.
Fit the other end of the Receiver Video/Audio Lead to the direct input video/
audio of your TV. Connect yellow to video in, and white or red to an audio in
socket.
As an alternative, you may prefer to fit this in to the Video/Audio connectors
on a video recorder or VCR.
Page 4
SCREW ANTENNA
ONTO RECEIVER
