| A S S E M B LY I N ST R U CT I O N S
HOMEBASE
®
A S S E M B LY
(Optional: Base can be assembled
with or without legs) Place the larger
legs on end rails and center support,
use the two smaller legs (circled
above) on the side rails.
Place one roll of support slats
along an end rail. Unroll the
slats towards the center of the
foundation, along the support
beam. Do this symmetrically with
the other roll of slats, starting at
the other end. Unroll towards the
center so the two sets of slats
meet in the middle.
Need Assembly Assistance?
We are available via Live Chat! at
Nestbedding.com
Call us at
1-800-992-2001
Email us at
USB Charging Port
A.
Set up USB Ports before slats are in place.
B.
USB are already installed in side rails.
C.
Connect them to the Y cable connector.
D.
Then connect the Y cable connector to the
Power Supply unit.
E.
Use the wire ties to tie up excess wires.
A s s e m b l y
Step 6. (Optional: Base can be assembled with or without legs)
Screw in all 9 wood legs. And Flip frame over.
6
8
7
A s s e m b l y
Step 8. Place one roll of support slats along an end rail. Unroll
the slats towards the center of the foundation, along
the support beam. Do this symmetrically with the
other roll of slats, starting at the other end. Unroll
towards the center so the two sets of slats meet in
the middle.
A s s e m b l y
Need Assembly Assistance?
We are available via Live Chat!
at Nestbedding.com
Call us at 1-800-992-2001
Email us at: