nest A0028, Руководство пользователя, Страница: 13 / 24

13
How to test your Nest Detect
You should test your Nest Detect at least once
each year . To check to make sure open/close
detection or motion detection is working on
your Nest Detect, follow these instructions .
1 . Tap the gear icon in the upper right corner of
the Nest app home screen .
2 . Select the Nest Detect you want to test from
the list .
3 . Select “Check setup” and follow the app
instructions . It will walk you through opening
and closing your door or window, or testing
motion detection in the room .
Operation
What it means What you see
BLUE pulse Nest Detect is working right .
GREEN pulse If enabled, Quiet Open can be
used on this door or window .
BLUE pulses Nest Detect hasn’t been set up
and added to your Nest Account .
RED blinking Unpaired, and critical battery
YELLOW pulses There’s a problem with Nest
Detect . Check the Nest app for
more information . It could mean
a few things:
• The battery has less
than 30 days left .
• Nest Detect needs to
be recalibrated .
• There’s an issue with
Detect’s hardware .
5x
How to check Detect's status
Just press the button and the light ring will tell
you if Nest Detect is working and connected to
Nest Guard .
Restart
If your Nest Detect loses its connection to the
Nest app, or the light ring glows yellow when you
press the button, it might help to restart it . Just
press and hold the button for 10 seconds .
Reset to factory settings
If you remove Nest Detect from your Nest Account,
you must reset it to factory settings before it
can be used again . To reset:
1 . Set Nest Secure to Off, or the alarm will
sound when you reset Detect .
2 . Press and hold down Nest Detect’s button
until the light ring pulses yellow (around
15 seconds) .
3 . Release the button when the light ring
pulses yellow .
Check for updates
Nest Detect will automatically update its software,
but you can manually check for updates if you want .
1 . Disarm Nest Secure .
2 . Press Detect's button and release it .
3 . Press the button again and hold it down .
Release it when the light blinks blue .
4 . Detect will begin automatically updating its
software and turn off the light when finished .