Ness Pro 12/2 Скачать руководство пользователя страница 4

Страница: 4 / 132

PRO SERIES DVR User’s Guide

11. An authorized dealer with manufacturer-approved components must perform replacement of

any component. Unauthorized substitutions may cause a safety hazards and void the warranty.

Power

1. This electronic device must be connected to an approved regulated power outlet, voltage as

indicated on the power input must be observed before connection.

2. This Digital Video Recorder is shipped with its own AC adapter. Do not use the Digital Video

Recorder with a different adapter.

3. Do not allow anything to rest on the power cord. Do not place the Digital Video Recorder

where people will walk on the cord.

4. When you disconnect cords, remember to pull them by the plugs and not by the cords

themselves. This will prevent damage to the cords, plugs, ports, and jacks.

5. If an extension cord is used with this Digital Video Recorder, make sure that the total ampere

ratings of the products plugged into the extension cord do not exceed the extension cord’s
ampere rating. Also, make sure that the total current of all products plugged into the wall outlet
does not exceed 15 amperes.

Содержание Pro 12/2





































































































































Результаты поиска

Содержание Pro 12/2

Отзывы:

Бренды по названию

Популярные бренды

Ness Pro 12/2, Руководство пользователя

Результаты поиска

Содержание Pro 12/2

Отзывы:

Бренды по названию

Популярные бренды