User Manual of Network Camera
9
Connecting the network camera with static IP directly
You can also save the static IP in the camera and directly connect it to the internet
without using a router.
Figure 2-3
Accessing the Camera with Static IP Directly
2.2.3
Dynamic IP Connection
Before you start:
Please apply a dynamic IP from an ISP. With the dynamic IP address, you can connect
the network camera to a modem or a router.
Connecting the network camera via a router
Steps:
1.
Connect the network camera to the router.
2.
In the camera, assign a LAN IP address, the subnet mask and the gateway.
3.
Set port mapping. E.g. 80, 8000, 8200 and 554 ports. The steps for port mapping
vary depending on different routers. Please call the router manufacturer for
assistance with port mapping.
4.
Apply a domain name from a domain name provider.
5.
Configure the DDNS settings in the setting interface of the router.
6.
Visit the camera via the applied domain name.
Figure 2-4
Accessing the Camera with Dynamic IP
