7
2.
Camera Cabling
Please follow the instructions below to complete IP Camera connection.
2.1
Connect Ethernet Cable
Please follow the instructions below to connect Indoor/Rugged IP Dome
Camera’s Ethernet cable.
2.1.1
Indoor Camera
The Ethernet connector, which is located in the rear of the camera, is shown
below:
PoE Connection
Before connecting the Ethernet Cable, please open the dome cover first.
Connect the one end of the Ethernet cable to the network port on the camera,
and the other end to Power Sourcing Equipment (PSE) like hubs or routers.
Check the status of the link indicator and activity indicator LEDs; if the LEDs are
unlit, please check the connections.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity
indication.
NOTE:
Please use the RJ-45 connector without the boot cover for the
Indoor IP Camera.