Nescafe Alegria 860-1.0, Руководство по эксплуатации и устранению неисправностей, Страница: 4 / 4

QUICK CLEANING GUIDE
ONCE A MONTH
1. When removing the dispensing heads, take out the whipper blades/Impellers
and wash in mild soapy water before refitting. The whipper blades/impellers are
shown in the diagram below. These may still be attached to the motor shaft after
removal of the turbo chamber. Simply pull them off if this is the case.
2. Empty out the product canisters and give them a deep clean in hot soapy water.
3. Dry the product canisters thoroughly before refilling with product.
NOTE: the canisters MUST be completely dry before refilling
4. Wipe down the area behind the product canisters and the interior of the
machine with a lukewarm cloth.
A. MIXING BOWL, WHIPPER HOUSING
(in one piece and clamp)
B. WATER INLET (separate piece)
C. IMPELLER
D. NOZZLE
E. STEAM TRAP
F. DISPENSING TUBE
EVERYDAY CLEANING IN MORE DETAIL
1. Open the front door.
2. Close powder chute and remove canister.
3. Move the clamp (A) to the right to unlock and
removed the mixing bowl (B) and water inlet (C) all
together.
4. Remove the steam trap (D).
5. Remove the impeller (E) from the whipper motor
shaft (F) if desired you may use the steam trap as a
lever. Remove the ‘O’-ring.
6. Clean and sanitise all parts - avoid using a
dishwasher for the impeller (E)
7. Rinse with clean water and dry completely before
reassembling
8. Additionally, before reassembling, wash and
sanitise the whipper motor shaft (F) and area with
hot water.
Please Note
Ensure the following when reassembling the mixing bowl:
1. Correct alignment of impeller and whipper motor shaft
2. Correct alignment of motor housing and mixing bowl with
clamp
INTERIOR PARTS
A
B
C
D
E
F